3177 Latta Rd,

Rochester, NY 14612

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

3177 Latta Rd,

Rochester, NY 14612

Commercial Pipe Lining & Bursting Services

Local Plumber-Commercial Pipe Lining & Bursting

Our Services

Superior Commercial Plumbing Solutions is Our Promise

Trusted & Experienced Services to take care of your Commercial concerns promptly and completely so it does not impact your business.

Pipe Lining System Capabilities:

  • Drainage and sewer line pipes of all types (including galvanized steel, cast/black iron, copper, and lead pipes).

  • Insertion of part or whole areas.

  • Site repairs of joints and other structural defects.

  • Fix all typical pipeline products.

  • Sizes from 3 ″ to 10 ″.

  • Flexes approximately 90 degrees.

  • Blind ends.

  • Lengths approximately 300 FT.

Proudly Serving All Monroe County, New York

Lincoln Park, Otis, Brighton, Crittenden, Irondequoit, North Gates, Maplewood, Newport, Greece, Bailey

Retails Stores and Chains

Shopping Centers / Malls

Realty Management

Office Buildings

Hospitality / Hotels

Industrial / Factories

Schools / Colleges


Hospitals / Assisted Living



What Is Pipe Lining?

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project in Monroe County, New York

Pipe-lining is a no-dig alternative for replacing or fixing damaged, broken, leaking, or clogged up pipes. Above all, it is necessary to deal with this, especially with your business drain lines.


Since it is a “no-dig” method, costly excavation and demolition are no longer required. As a result, pipe-lining is more economical than traditional re-piping techniques such as excavations or open trench techniques.


Picture a smooth brand-new PVC pipeline put within the original broken pipeline to very best illustrate pipe-lining. The gap between the old and brand-new pipes is closed with an epoxy water resistant seal. As a result, regardless of the decline of inner size, tests can prove an enhancement in original stream capability.

How do I realize I require pipelining?

The damages are most likely already underway if you own or operate a building that is more than 10 years old.


You will probably see or experience the following pipeline rust signs:


  • Water with staining
  • Discolorations on sinks
  • Leakages or smells
  • Poor water stream
  • Constant sewage backups

What kinds of pipelines can be lined?

Lining can be done on commercial drain drain pipes from the property to the mainline. Roof drain pipelines, collectors, and business floor drain pipelines can likewise be dealt with lining.

What are the benefits of pipe-lining?

Do not dig … recondition! Excavations can be very costly in terms of workers, time, products, permit fees, and damage expenses.


Pipe-lining does not interfere with a business day-to-day activities. It will not lose any profits because of noisy digging equipment or even the need to section off risky working areas. Plus, drain activities will only be stopped for a brief time period during the job.

Is sewer pipeline lining effective?

Lining drain pipelines can save approximately 75% of the cost of replacing an old pipeline with a brand-new one for commercial establishments.


The labor cost reduces considering that less hours are required to carry out the trench-less treatment. It is simply just the very best value amongst all repair alternatives readily available.

How much does it cost to reline a pipe?

The cost of relining a broken drain pipeline ranges from $80-250 per foot, with an average cost of approximately $160 per foot. Whereas, repair prices for normal sewer pipelines might range from $4,000 to $20,000, depending upon the situation.

What triggers pipeline issues?

Tree Root Seepage: Tree roots can typically pierce and enter drain systems by means of connections, fractures, and pipes. As a result, obstructions and water loss will begin to happen.


Water: Gradually, water can break down, corrode, compromise, and develop pinhole leakages in the system. Similarly, “hard water” consisting of minerals can cause pipelines to get encrusted and blocked, resulting in obstructions.


Moreover, pipe wall surface areas will gather water and “soft water” that may contain acidic minerals, can very easily dissolve and thin out the pipeline walls.


Plumbing Products: Without a doubt, metal piping systems made of copper or other galvanized metals present significant concerns with time. Concerns might happen in as little as 6 years.


But on average, many copper and galvanized pipelines will start to corrode after 10 years. Pipe-lining is the ideal long-term solution to pipeline deterioration.

What are the signs of a broken sewer pipeline?

Here are the 10 most typical signs of a broken drain pipeline:


  • Sewage Backups and Clogs
  • Sewer Gas Odor
  • Mold Problem
  • Slow Drain
  • Additional Green and Lush Patches in Turf
  • Indentation In Lawn or Under Pavers
  • Structure Cracks, Settlement, and Sinkholes
  • Insect Infestation
  • Rodent Problems
  • Pooling Septic Waste

Is a sewage leakage harmful?

The most common  danger presented by a sewage leakage are gases. Sewage can produce a large range of gases, including co2, methane, chlorine, nitrous oxide, hydrogen sulfide, and sulfur dioxide.


In high dosages, hydrogen sulfide is dangerous and can cause queasiness, confusion, and even death.


If you believe or not sure that you may have a problem, call a professional plumber immediately.

the best solutions

Residential & Commercial Plumbing

24/7 Emergency Service

The Pipe Lining Process

Local Plumber-Commercial Pipe Lining Diagram

PREPARATION: To attain the very best outcomes, the present pipeline needs to be well prepared. This consists of examining the pipeline with a premium camera, cleaning the pipe, and finally determining its size and length.


Massive repairs might require the disruption of water flow|streams through existing pipelines in order to prepare the pipeline for lining.


INSTALLATION (INVERSION): Setting up a pipe liner includes inserting the liner through drain clean-outs or minor openings. In the case of partly broken drain areas, we simply restore the broken portion of the pipeline’s opening.


The products used for the liner are chosen based upon the condition of the pipeline. Whereas, straight pipelines use standard liner tubes, while pipes with severe bends, angles, and transitions require more flexible tubes.

USING THE EPOXY: The epoxy is what holds the liner to the pipeline wall. This bond forms a really tight fit, avoiding water from exiting the pipeline or getting in. After relining the pipeline using a pipe liner system, any internal deterioration or disintegration stops at once. A lined pipeline can no longer be permeated by roots.  When a pipe is lined, it will be free of root intrusions for the rest of its life.


TREATING PROCEDURE: The epoxy and liner remedy in 4 to 12 hours. After the pipelines have actually been healed, service is restored.

What Is Pipe Bursting?

Pipeline bursting is a method for replacing underground pipelines such as a sewer or water pipes without using digging devices or open trench techniques. Except for brand-new building and construction, many initial U.S. drain drain pipes and water lines have actually reached completion of their useful life and need to be updated or rebuilt. For decades, streets, walkways, landscaping, and even buildings have actually been built on top of these long-standing underground pipelines. The interruption triggered by open trench building and construction can be considerable.


Layers of cement, landscaping, and asphalt need to be excavated and removed in order to expose the pipeline and lastly replace it.

Local Plumber-Commercial Pipe Bursting Diagram

The pipeline bursting method uses a cone-shaped bursting head that is slightly bigger at its base than the size of the existing broken pipeline.


The bursting head is then attached to the replacement pipeline and fed into the shattered pipeline through an entrance hole.


The damaged pipeline will start to break apart as the replacement pipeline goes through the existing pipeline, thanks to the conical bursting head.


The pipeline bursting professional will then use a pull rod or hydraulic force to shatter the existing pipeline and pull it out of its present area.


Since the brand-new pipeline is linked to the bursting head, it easily fills the bursting head’s hollow. You now have a brand-new pipeline!

What are some benefits of pipeline bursting?

Pipeline bursting is the just trenchless method of replacement that enables the initial pipeline to be refitted. It might likewise help you save cash in the long run!

There are numerous other factors to think about pipeline bursting:


  • Minimal landscape damage– Since it just needs two openings, you won’t need to stress over your backyard being turned up by excavation equipment.
  • Minimal downtime– There is no need to close or limit areas, resulting in little downtime! It just takes a few hours to finish the procedure.
  • lower labor expenses– Pipe bursting needs less hours and less labor to finish.
  • Less disturbance There is no need for enormous, noisy equipment to do the task!
  • Pipeline longevity You can replace the present pipeline with a more robust pipeline to prevent needing to repeat the procedure in a few months or years.
  • {Increased pipeline flow You might note an increase in your wastewater flow if you use the trench-less drain method.

Is pipeline bursting safe?

Pipeline bursting is presently among the most safe and most cost-effective plumbing repair techniques readily available.

What kind of pipeline is used for pipeline bursting?

The most commonly used replacement pipes for pipeline bursting applications have actually been high- and medium-density polyethylene (HDPE and MDPE).


The essential benefits of PE pipeline are its durability, resilience, sturdiness, toughness, longevity, flexibility, and its versatility.

How long has pipeline bursting been around?

Pipeline bursting was developed in the late 1970s in the UK by D. J. Ryan & Sons in collaboration with British Gas for replacing small-diameter, 3- and 4-inch cast iron gas mains.


This method was patented in the UK in 1981 and later by the United States in 1986; both patents expired in April 2005.

Is pipeline bursting better?

When compared to routine drain repair, pipeline bursting is one of the cleanest drain options readily available. Pipeline bursting has the least effect on the surrounding environment because it gets rid of the need to dig up any roadways or landscaping.


This likewise stops possibly deadly poisons from entering your system.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project in Monroe County, New York

Proud to Install, Repair, and Service the Following Brands: